Understand why using epoxy is an utter failure for repairing in ground swimming pools, foundations and walls and structures that don’t have equal open presence on both sides of the wall – and why Kevlar Staples Fail, why Carbon Fiber Staples Fail and why Torque Lock Staples are the only solution for structural crack repair. This video explains it all and shows you why Torque Lock Structural Staples are the ONLY solution to end structural cracking forever.
Visit: https://torque-lock.com to order your structural staple kits and to learn more about the only permanent solution in the world for structural cracking.
In 2004, frustrated with traditional crack repair methods, including epoxy injection, re-bar, etc., Torque Lock founder and inventor Darren Merlob developed a revolutionary technique for repairing structural cracks. Built stronger, easier to use and guaranteed to deliver a controlled compression that stays – Darren’s device earned a Patent and has since been used world wide. That’s 7 Continents, hundreds of countries and in thousands upon thousands of applications. It’s the proven solution to structural cracking!
All Torque Lock Staples are made in house. This is how we guarantee consistency and quality control. Because the Torque-Lock ™ staple is used to repair and stabilize cracks in virtually any structure composed of cement, gunite, concrete, poured block and more, we insist that production is kept in house to ensure customers of only the best quality of their build. Applications include swimming pools, spas and fountains, concrete foundations, garage and basement floors, sea walls – if it’s concrete and it cracks, Torque Lock is there, and it works.
Using its patented Cam Lock™ technique, it stabilizes cracking by creating up to 5000 lbs of compression torque for each staple installed. When applied in the recommended stitching method, also patented, the end result is durability, strength and support.
When designing the Torque Lock™ staple, we kept 3 things in mind:
A 10 foot concrete crack can be repaired in as little as 1 hour. You do not need to be a professional contractor to install the staples. handy with tools helps, but be assured, complete video instruction is available here on the website and you can see how the process is done. while we may recommend hiring someone familiar with concrete and structural repair to do the job, it can be done by literally anyone.
The Torque Lock™ staple countersinks into the existing concrete structure allowing the installer to apply plaster, marcite, tile, exposed aggregate finishes, Chattahoochee, cool deck, or any other surface to create a finish like there was never a crack to begin with.
Our Torque Lock™ Staple is Guaranteed. Its that simple (see warranty for full detail.)
Five Torque Lock Kits are available for a variety of applications (as seen below):
TL10 – Includes whats required to repair a 10 foot crack.
TL30 – Includes whats required to repair a 30 foot crack.
TL50 – Includes whats required to repair a 50 foot crack.
TLR-45 – Includes 45 degree radius staples for corner crack applications.
TLR-90 – – Includes 90 degree radius staples for corner crack applications.
The Torque Lock™ TL Staple come in two sizes – 3 inch and 6 inch. This is integral to the pattern you install them in. The cams are interchangeable in all staples and turning them is done with a standard ratchet attachment and torque wrench, found in your local home improvement center. It’s is all that’s needed to turn the cam into position.