Crack Seal Flexible Membrane
The Crack Seal Flexible Membrane is a 2-part waterproofing base material with aggregate mix and mesh membrane for bridging capabilities. It is manufactured specifically for structural crack repair and offers 50 square feet of soft coverage. This kit includes:
- Base Material
- Aggregate Mix
- Mesh Membrane
Retail Price: $231.00
Contractor Price: $198.00*
* PLEASE NOTE: All Contractor Orders will be Verified and Confirmed.
The Crack Seal Flexible Membrane is a 2-part waterproofing base with aggregate mix and mesh membrane for bridging capabilities. It is manufactured specifically for structural crack repair and offers 50 square feet of soft coverage. This kit includes the Base Material, Aggregate Mix, and Mesh Membrane.
Before coating, use high-pressure water to wash the substrate thoroughly. Use a 50% muriatic 50% water mix to clean as well.
Mix parts A and B thoroughly with a paddle bit or mechanical mixer. Apply with either a hard bristle paintbrush, roller, or trowel. For extra wide cracks, use the fiberglass mesh provided. Apply one coat and gently push mesh over the cracked or bridged area. Then apply another coat over the mesh. Apply one horizontal coat and one vertical coat.
Only if necessary. If re-coating, wait approximately 10 hours before applying the second coat.
One unit should yield approximately 50 square feet of coverage.
Do not apply in rain or in temperatures below 50ºF. Low temperatures or high humidity require longer drying times. Do not store at temperatures below 45ºF or above 120ºF.
Before coating dries, clean hands, tools, or spillage with warm soapy water. If the product dries, clean your hands with waterless hand cleaner. Curing time in high temperatures with low humidity allows approximately 8-hour dry times. In low temperatures, with high humidity, allow 12+ hours of dry times.
Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. Suspected of causing cancer. May cause respiratory irritation.
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing, and eye protection. Wash thoroughly after handling. Avoid breathing vapors, mists, and sprays. Contaminated work clothing should not be allowed out of the workplace. Use only outdoors or in a well-ventilated area.
IF EXPOSED OR CONCERNED: Get medical advice or attention. IF ON SKIN: wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice or attention. Take off contaminated clothing and wash it before use. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice or attention. IF INHALED: Remove person to fresh air and keep comfortable cleaning.
Store in a well-ventilated place. Keep the container tightly closed. Store locked up.
Dispose of contents/container to an approved waste disposal plant. See the safety data sheet for further details regarding the safe use of this product.
KEEP OUT OF REACH OF CHILDREN.